R200 RingSwitch
The R200 is designed to enable industrial Ethernet networks to be installed in a redundant ring configuration to eliminate network failure caused by either fiber or copper backbone failure.
The switch also incorporates two priority queues that are designed to ensure that the network data is deterministic. This is achieved by implementation of Layer 2 and Layer 3 priority tagging. In addition, head of line blocking prevention ensures that the switch does not become congested by low priority data. This allows engineers to design a reliable, deterministic and redundant network, while prioritising data into low and high priority queues.
The switch also incorporates two priority queues that are designed to ensure that the network data is deterministic. This is achieved by implementation of Layer 2 and Layer 3 priority tagging. In addition, head of line blocking prevention ensures that the switch does not become congested by low priority data. This allows engineers to design a reliable, deterministic and redundant network, while prioritising data into low and high priority queues.
Product Links:
- 30mS reconfiguration of redundant ring
- Up to 200 Switches supported in ring
- Layer2 / True network determinism
- Supports Layer 3 priority tagging
- Head of line blocking prevention
- Wide temperature range (–40°C to +65°C)
- Wide DC power range (19 – 60 VDC)
- No moving parts or electrolytic capacitors
- Low power consumption (Typically 8W)
- MDX/MDIX technology to easy switch connection
- Windows based configuration tool
- SNMP management facility
- Push button / auto-negotiation configuration
- 35 mm DIN rail mounting
- 19’ rack mounting and wall mounting options
- Volt free fault contact