RS-232/V.24 Isolators
The most common problems with an RS-232/V.24 interface is that it is unbalanced and very sensitive to noise and earth loop currents. Earth loops are caused when two pieces of equipment are connected to power sources with different earth potentials. A problem is caused when current travels to the wrong earth point via the signal ground on the serial connection. The Westermo isolators can solve these problems and are available in both DIN and table top housings.
MD-52 RS-232 Isolator
  • RS-232/V.24 interface
  • Protects connected units from lightning/ transients
  • Use to connect equipment on different earth potentials
  • Maximum data rate of 115.2 kbit/s
MD-52