DDW-220 Ethernet Extenders
The DDW-220 can be used to extend Ethernet networks over existing copper cables in point-to-point or line sharing applications. Point-to-point transmission distances of up to 10 km can be achieved with data-rates of 5.7 Mbit/s possible over shorter distances on a single copper pair. The built-in 4 port Ethernet switch makes the DDW-220 the only necessary component required to create a small network. Total galvanic isolation between all interfaces, extended type approvals and rugged mechanical design as well as extensive over-voltage protection and line interface voltage suppression makes the DDW-220 the best solution in harsh industrial environments.





  • Plug and play
  • Data rates up to 5.7 Mbit/s
  • Distance up to 6.2 mi (10 km)
  • Extensive line protection
  • 2 x SHDSL
  • SNMP and comprehensive diagnostic
  • 16 - 60 VDC power supply
  • Reverse polarity protection
  • 4 port Ethernet switch
  • Web interface
  • Made for extreme environments
    • -40°F to +158°F
    • Metal Housing
    • IP 40
    • DIN Mounting