Contact our Wisconsin-based experts
This product is being phased out and has a last order date of March 31, 2020. For additional information, please view the Life Cycle Notification.
The TD-36 485 is an industrial modem designed to allow cost effective and simple remote access to legacy serial industrial equipment. The AT command driven modem is capable of synchronizing with a wide range of traditional modem negotiation standards providing data rates up to 33.6 kbit/s over both PSTN and 2- or 4-wire lease line circuits.
Designed with remote unmanned industrial locations in mind the modem can operate in extremes of temperature and electromagnetic field. The complete galvanic separation of all interfaces ensures earth loops and transients do not interfere with communication. To keep visits to the site to a minimum a watchdog monitors the modem ensuring constant readiness, and remote re-configuration means that changes to settings can be handled without a site visit.
Firewalls are not an issue as data does not use the internet and with call back security it is impossible for either accidental or deliberate access to any equipment attached to the modem. To provide resilience a second line interface allows a PSTN connection to be established in the event of a lease line failure.
The modem is also simple to configure using the Westermo TD-tool software; standard commands can easily be entered and saved configurations downloaded. RS-232 connections can be made using screw connections as well as the standard D-sub. The modem is designed to be connected to devices with no ability to control dialing so special functions like data dialing and DTR dialing are provided to enable these devices to automatically establish connection.
|Product Life Cycle||Limited
|Product Family||PSTN/Leased Line Modems