RS-422/485 Converters and Repeaters
These products are discontinued. When a product is in this phase, it is no longer being produced or maintained. Limited stock may be available for some discontinued products.
The RS-422 and RS-485 interfaces are the most common standards used in modern industrial data communication systems. Most of the well-known fieldbuses like Profibus and Interbus use RS-485 as their electrical standard. RS-422 and RS-485 have the advantage that they can be used at very high data rates, for example Profibus can handle rates up to 12 Mbit/s. All Westermo RS-422/485 converters or repeaters can be used in systems that correspond to these standards. The repeaters can handle data rates up to 1.5 Mbit/s but the converters are limited by the RS-232/V.24 interface to a maximum data rate of 115.2 kbit/s The Westermo RS-422/485 product range can be used for 2- or 4-wire and both in point to point or in bus type systems.
Westermosales.com is a Gross Automation website © 2019 Gross Automation. Privacy Policy | Terms of Service
Westermo is a registered trademark of Westermo Network Technologies AB, a Beijer Group company, in the United States and/or other countries.
While we have made every attempt to ensure that the information contained in this site has been obtained from reliable sources, Gross Automation is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information in this site is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and fitness for a particular purpose. In no event will Gross Automation, its related partnerships or corporations, or the partners, agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information in this Site or for any consequential, special or similar damages, even if advised of the possibility of such damages.
Westermo is a registered trademark of Westermo Network Technologies AB, a Beijer Group company, in the United States and/or other countries.
While we have made every attempt to ensure that the information contained in this site has been obtained from reliable sources, Gross Automation is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information in this site is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and fitness for a particular purpose. In no event will Gross Automation, its related partnerships or corporations, or the partners, agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information in this Site or for any consequential, special or similar damages, even if advised of the possibility of such damages.
